ABHI FIRE SAFETY SERVICES LLP

Corporate

Closed-circuit television (CCTV). The use of video cameras to relay a signal to a particular location, on a restricted collection of monitors, is known as video surveillance. The signal is not provided free, including broadcast television, and it may use point-to-point (P2P), point-to-multipoint (P2MP), or mesh wired or wireless connections. While almost all video cameras meet this description, the term is most commonly applied to those used for surveillance in areas where protection is required, such as banks, shops, and other public places.

Accessories:

• Camera
• DVR
• PC Based DVR Card
• Non PC Based DVR (Stand Alone)

AFS specializes in the distribution of various forms of fire extinguishers (Automatic & Portable).

• Water and Foam
• Carbon Dioxide
• Dry Chemical
• Wet Chemical
• Clean Agent
• Dry Powder
• Water Mist
• Cartridge Operated Dry Chemical

The Sprinkler System for Dust Suppression is basically designed to prevent liftoff of Dust from stockpiles and roads. Water Spray over the Stockpile area is produced by the sufficient number of sprinklers suitably installed in a ring manner to cover the entire projected area of the Stock Pile/Roads. The Sprinklers are swiveling type with the provision of change in the swiveling angle as well as the angle of the nozzle from the horizontal. The sprinklers break up the water into small droplets simulating natural rainfall. Each Sprinkler is controlled by a flow activation system having the facility to operate the sprinkler in a pre-determined duration. The water sprayed on the Stockpile will wet the material and prevent lift-off of Dust due to wind etc.

For a complex material handling system, there is a need of utilizing a combination of the above system. Since our Organization manufactures all kinds of Dust Suppression Systems, we are in a unique position to offer a comprehensive solution to the Dust Suppression needs of Material Handling System and match and optimize the dust control requirements and process needs.

Application Field:

Stockyard, Hall road, and a berth in the seaport including open store/Covered store and PG Test is not applicable for the system due to open execution.

AFS provides fire hazard analysis, fire safety analysis, and other fire hazard assessment and consulting services as required by code, facility-specific standards, and insurance-related requirements. A fire hazard analysis (FHA) is a method of evaluating the hazards present and subsequent consequence potential at a processing plant or storage facility that requires an in-depth assessment of fire risk due to significant quantities of flammable materials.

These assessments are based on specific review criteria that are dependent upon the types of hazards being assessed, as well as commodities stored and facility processes.

Each assessment conducted by AFS is completed by a professional fire protection engineer with knowledge of fire risk, fire safety, consequence analysis, and other hazard analysis techniques.

AFS offers risk management consulting services including the development and completion of Fire Risk Assessments (FRA), where required by an authority having jurisdiction (AHJ) or for use as a design basis.

Fire risk assessments are typically used to validate performance-based solutions, studies, code equivalencies, and regulatory compliance evaluations. Fire risk assessments and analyses should always be completed by experienced professionals with a documented background in the subject matter.

Our professional engineering and fire protection consulting staff have the educational knowledge and years of experience required to prepare and conduct a valid fire risk assessment for any facility type.

As a leading Fire Protection firm, we help organizations to manage their Fire and Safety Risks. Our Fire Safety Consultants are having years of industry experience to provide you the best-suited solutions

Our solutions help you to meet legal obligations, ISO 45001 requirements, and industry best practices.

The design of any fire-protection system is an exact science that takes into account a building’s use, occupancy, footprint, and even its other installed systems.

Planning for fire protection involves an integrated approach in which system designers need to analyze building components as a total package. In most cases, the analysis needs to go beyond basic code compliance and the owner’s minimum legal responsibilities for providing protection.

Code Compliance: Code compliance is the first objective in any design. Codes are legal minimum requirements; you have to meet the minimum with any design.

The Basics: In the design process, these typical fire-protection system goals are on the table for consideration:

• Saving lives.
• Saving property.
• Preserving business continuity.

It all depends on how a building is used and occupied. A warehouse or storage facility, for example, will have different fire-protection requirements than a multi-tenant office building.

While no standard fire-protection design blueprint exists for any two buildings, the systems found in any building typically include these basic components

• Detection.
• Alarms and notification.
• Suppression.

Procurement is the process of finding and agreeing to terms, and acquiring goods, services, Direct procurement, which is the focus in supply chain management, directly affects the Purchasing refers to the major function of an organization that is responsible for the acquisition of required materials, services, and equipment.

Fire Alarm System Commissioning is defined in BS5839-1 as the process which involves thorough testing of an installed system, to ensure it operates correctly in accordance with the recommendations of the standard and project specification.

At AFS our engineering staff are time served, highly qualified technicians.

Our team of engineers has all been involved in programming fire alarm panels with complex cause and effect on many different systems; with this in mind, you can rest assured we can cope with any programming requirements you may have to complement the mandatory testing.

Inspection and maintenance services ensure that your fire protection equipment will operate properly when you need it most. AFS Offers a well-trained service department fully equipped to meet our client’s maintenance and repair needs.

Regular, periodic inspection and testing is the best defense against system failure so that you may continue to operate your business securely and efficiently.

AFS offers complete inspection and testing services for fire extinguishers, fire-Fighting Systems, Fire Suppression systems, Access Control systems, CCTV, Public Addressable systems.

Some of the many inspection and testing services we offer:

• Annual inspection and recommended testing of all fire extinguishers.
• Regular periodic inspection, testing, and maintenance on all types of fire protection systems
• Regular inspection of all special hazard suppression systems including explosion suppression
• Inspection reports transmitted electronically to the customer
• Annual service plan automatically schedules system inspections well in advance of the expiration date
• Barcoding of fire extinguishers for record-keeping and inventory control
• Preserving business continuity.

AFS has built its reputation on providing superior customer service. We specialize in the inspection and maintenance of a variety of fire protection equipment and systems. Speak with a professional at AFS today in order to schedule your next service.