ATTAR STEEL STRUCTURES PRIVATE LIMITED

Corporate

Sandwich panel/puff panel are thermally insulated composite building elements for roof and wall cladding in buildings, they consist of an inner and outer galvanised sheet metal cover, coated on one side. Sandwich panel/puff panel are used in industrial construction i.e. construction of industrial halls, cold storage facilities, Textile units, pharma industries etc…

Eave Struts are typically constructed from cold formed ‘C’ sections and are rolled to suit the roof slope. Their primary function is to support the gutters and also to act as a junction of the roof and the wall cladding. This member transmits longitudinal wind force on the end walls from roof brace rods to wall brace rods.

Panels used for sheeting purpose are generally of ribbed steel sheets used as roof and wall sheeting, roof and wall liners, partition and soft sheeting.

Panels used for sheeting purpose are generally of ribbed steel sheets used as roof and wall sheeting, roof and wall liners, partition and soft sheeting.

Purlins and Girts are structural members made up of cold formed steel Z & C sections that are supported on columns, rafters or building walls. They can be lapped and nested at the supports, to create a continuous beam configuration. They are placed under the roof, wall and the perimeter of the building and serve as supports to the roof sheeting and wall cladding. Purlins, girts and eave struts are cold formed steel members which have a minimum yield strength of 345 MPa (50,000 psi) and will conform to the physical specifications of ASTM 572 (Grade 50) or ASTM A653 (Grade 50) or equivalent.