AVANTE GLOBAL SERVICES PRIVATE LIMITED

Corporate

This product conforms to the prescriptions of the European directive on low voltage 73/23/EEC (LVD) and to EMC directive 89/336/EEC, amended by 93/68/EEC. 
Conversion Average value
Display refreshing rate 2 times per second

Features:-
4 digit LCD display.
Automatic Polarity Indication.
Low battery indication.
Measures high insulation resistance with auto range:
250V: 4MΩ to 1000MΩ.
500V: 4MΩ to 2000MΩ.
1000V: 4MΩ to 4000MΩ.
Measures AC and DC voltages: 0V to 600V.
Function Keys: POWER, GO, ZERO, LOCK, BACKLIT.
Continuity Test.
Auto Discharge.
Auto Power Off.

This meter can make 5 measures of air quality once a time, including CO2, PM2.5, PM10, temperature and humidity.
The measurement for CO2 is used for the air exchange rate of total heat exchangers or other ventilation fans or systems, the measurement for PM2.5 or PM10 is used for the cleaning capacity of air purifiers, and the measurement for temperature and humidity is used to estimate the dehumidification effect of dehumidifiers.

Features:-
Real-time measurement of CO2/PM2.5/PM10/temperature/humidity.
°C or °F unit selection.
Locking function for Maximum value/minimum value/average value.
Auto-shutdown function and disable auto-shutdown function.
Adjustment and calibration function (CO2/temperature/humidity).
CO2/PM2.5/PM10 red backlight alarm.
Manual record and auto-record.
Key sound assists to ensure the operation works.

PM2.5 is:
A lot of pollutants existing in the air, where the dust-like particles floating in the air are called particulate matter (PM). Distinguishing particle size, the particles smaller than or equal to 2.5 microns, i.e. PM2.5 is commonly known as particulate matter in units of μg/m3. With the diameter less than 1/28 of human hair thickness, the particles are so fine as to penetrate the alveoli, enter the blood vessels directly, and even circulate throughout the body via the blood. Therefore, the impact on the human body and ecology cannot be ignored.
 
The regulations for PM2.5 in Taiwan:
The Air Quality Act of Taiwan Environmental Protection Administration stipulates that the average value shall not exceed 35μg/m3 within 24 hours.
The standard adopted by Taiwan is the same as the standard of the US, please refer to the US AQI if to view the AQI in Taiwan.

Many applications include: Warehouses, factories, office buildings, restaurants, schools, library, hospitals, photographic, many video, parking garages, museums, art galleries, stadiums, building security. 

Features: 
Low cost highest precision.
Overload Indication: LCD will show “OL” in the left highest position.
Low battery Indication.
Sampling Rate: 2.5 times per second for digital display.
Spectral response close to CIE luminous spectral efficiency.
Cosine Angular corrected.
Measuring lights source include all visible.
Measuring intensities of illumination in Lux or footcandles.
DC analog output.
Data hold.
Zero adjustment.
Large integrated circuit design.

Transmission measurement is most suitable for measuring the effectiveness of the solar film.
Solar radiation measurement.
Car windows light intensity measurement.
Optimal incident angle for the solar panel.
Measurement of the sun’s transmission through transparent and film glass
Convenient, no need to adjust, data displayed clearly.
 

Features:-
Super low price, high precision.
Measurable light sources, including all visible light.
Overload display OL.
Select either W/m2 or BTU / (ft2*h) units1
Stable for long use.

This Sound Level Meter has been designed to meet the measurement requirements of safety Engineers, Health, Industrial safety offices and quality control in various environments.
Ranges from 30dB to 130dB at frequencies between 31.5HZand 8 KHZ .
Display with 0.1dB steps on a 4 digits LCD.
With two equivalent weighted sound pressure levels, A and C.
USB interface 14,000 records datalogger(TM-103)

Features:-
Data hold
Auto power off
Backlit display
Max/Min
Auto ranging
Time weighting :fast slow
Frequency weighting: A,C

TM-4100 Tacho Meter can be used for various types of equipment such as conveyors, cooling equipment, dryers, elevators, windmills, rotary feeders and grinders. It is available for contact (with 4100K tool kit) and non-contact applications. The non-contact can measure from 40mm up to 500mm.

This meter measures the vibrations of the rotating and reciprocating machines, as well as bearing damage, measurement items are acceleration, speed, displacement,  which can check if the machine is to be repaired or upgrade.

Features:-
The maximum dots of liquid crystal display (LCD): 1999.
Measurement items: VEL (velocity), /ACC (acceleration), /DISP (displacement)
Function: acceleration (RMS, PEAK, MAX, min) .
                velocity (RMS, PEAK, MAX, min).
                displacement (P-P, MAX, min , P-P).
                Unit:acceleration: m/s², g, ft/s².velocity: mm/s, cm/s, inch/s.
                displacement: mm, inch.
Frequency characteristics:
LO range: 10hz ~ 1khz. meet the international standard ISO 2954-2012.
HI range: 10hz ~ 5khz.
Auto power off and disable auto power off.
Over load sign: “OL”
The manual recording can be saved up to 199 data files (ST-141),
or the manual recording plus automatic recording can be saved up to 15000 data files  (ST-141D).
USB interface.(ST-141D)

Tenmars TM-183P Temperature/Humidity Meter

Review the following safety precautions to avoid injury and prevent damage to this probe
or any products that connected to it.
Observe Maximum Working Voltage

To avoid any injury, do not use the probe under the condition that the voltage between
either input lead or earth is above 1000Vrms CAT III. This voltage rating applies to both
probes and both settings 1/10 & 1/100 (TT-SI 9001) and 1/20 & 1/200 (TT-SI 9002).

Review the following safety precautions to avoid injury and prevent damage to this probe
or any products that connected to it.
Observe Maximum Working Voltage

To avoid any injury, do not use the probe under the condition that the voltage between
either input lead or earth is above 1000Vrms CAT III. This voltage rating applies to both
probes and both settings 1/10 & 1/100 (TT-SI 9001) and 1/20 & 1/200 (TT-SI 9002).

This probe is grounded with the shell of BNC connector and an auxiliary grounding terminal,
through the grounding conductor of the power cord of the measurement instrument. Before
making connections to the input leads of this probe, ensure that the output BNC connector
is attached to the BNC connector of the measurement instrument and the auxiliary
grounding terminal is connected to a proper ground, while the measurement instrument is
properly grounded.

Morningstar’s well-known high quality and reliability is now available in a low cost solar controller. The SHS™ Controller is ideal for rural electrification systems with one to three solar panels. This controller was designed for markets outside the USA and Canada, and meets World Bank specifications and provides many features and benefits. The SHS Night Light version has automatic lighting control.

Morningstar’s well-known high quality and reliability is now available in a low cost solar controller. The SHS™ Controller is ideal for rural electrification systems with one to three solar panels. This controller was designed for markets outside the USA and Canada, and meets World Bank specifications and provides many features and benefits. The SHS Night Light version has automatic lighting control.

Morningstar’s well-known high quality and reliability is now available in a low cost solar controller. The SHS™ Controller is ideal for rural electrification systems with one to three solar panels. This controller was designed for markets outside the USA and Canada, and meets World Bank specifications and provides many features and benefits. The SHS Night Light version has automatic lighting control.

The SunSaver MPPT™ with TrakStar technology is the perfect charging solution for smaller off-grid solar systems up to 520Wp. An industrial-grade design proven in challenging applications and environments, SunSaver has been called the single most successful charge controller in the solar industry.

Since the introduction in 1996, more than 1.5 million SunSaver Controllers have set the standard for reliability and performance in demanding oilfield and mining installations in nearly 90 countries around the globe. Today, SunSaver is the world’s leading small solar controller for industrial and consumer markets, proven in mission critical applications where failure is simply not an option.

This third generation SunSaver brings over two decades of advances in software and electronics to the same rugged, hardened design that made the original famous. Own both a legend and the latest in a single product.

Since the introduction in 1996, more than 1.5 million SunSaver Controllers have set the standard for reliability and performance in demanding oilfield and mining installations in nearly 90 countries around the globe. Today, SunSaver is the world’s leading small solar controller for industrial and consumer markets, proven in mission critical applications where failure is simply not an option.

This third generation SunSaver brings over two decades of advances in software and electronics to the same rugged, hardened design that made the original famous. Own both a legend and the latest in a single product.

Since the introduction in 1996, more than 1.5 million SunSaver Controllers have set the standard for reliability and performance in demanding oilfield and mining installations in nearly 90 countries around the globe. Today, SunSaver is the world’s leading small solar controller for industrial and consumer markets, proven in mission critical applications where failure is simply not an option.

This third generation SunSaver brings over two decades of advances in software and electronics to the same rugged, hardened design that made the original famous. Own both a legend and the latest in a single product.

Since the introduction in 1996, more than 1.5 million SunSaver Controllers have set the standard for reliability and performance in demanding oilfield and mining installations in nearly 90 countries around the globe. Today, SunSaver is the world’s leading small solar controller for industrial and consumer markets, proven in mission critical applications where failure is simply not an option.

This third generation SunSaver brings over two decades of advances in software and electronics to the same rugged, hardened design that made the original famous. Own both a legend and the latest in a single product.

The EcoPulse™ is a pulse width modulation (PWM) solar charge controller within Morningstar’s Essential Series™ of products which provides essential off-grid battery regulation functions. This controller is easy to use, and designed for residential and leisure consumer applications. Metered and non-metered versions of this product are available at 10, 20, and 30 amp charge ratings for 12 and 24 volt battery systems. The EcoPulse is not sold in the USA or Canada.

The EcoPulse™ is a pulse width modulation (PWM) solar charge controller within Morningstar’s Essential Series™ of products which provides essential off-grid battery regulation functions. This controller is easy to use, and designed for residential and leisure consumer applications. Metered and non-metered versions of this product are available at 10, 20, and 30 amp charge ratings for 12 and 24 volt battery systems. The EcoPulse is not sold in the USA or Canada.

The TriStar™ is a three-function PWM controller for larger systems, providing reliable PWM solar battery charging or load control or diversion regulation. The controller operates in one of these modes at a time and two or more controllers may be used to provide multiple functions. The TriStar uses advanced technology and automated production to provide exciting new features at a competitive cost to regulate battery charging in home systems and professional applications. The 60 amp version is also available with a factory installed meter.

The TriStar™ is a three-function PWM controller for larger systems, providing reliable PWM solar battery charging or load control or diversion regulation. The controller operates in one of these modes at a time and two or more controllers may be used to provide multiple functions. The TriStar uses advanced technology and automated production to provide exciting new features at a competitive cost to regulate battery charging in home systems and professional applications. The 60 amp version is also available with a factory installed meter.

The Fluke 287 True-rms Electronics Logging Multimeter with TrendCapture quickly documents design performance and graphically displays what happened. Its unique logging and graphing capabilities mean you no longer need to download logged readings to a PC to detect a trend. The Fluke 287 packs more accuracy and convenience into a handheld multimeter than ever before:

Zoom on trend provides unprecedented ability to view and analyze TrendCapture data; zoom in up to 14 times.
Selectable AC filter (smoothing mode) helps display a steadier reading when the input signal is changing rapidly or noisy.
Adjustable recording and auto hold thresholds, specify a percentage change in the readings that begins a new event.
Large 50,000 count, 1/4 VGA display with white backlight. Multiple sets of measurement information can be simultaneously displayed at the same time.

The Fluke 1507 is a versatile, compact, handheld insulation tester for advanced industrial and electrical insulation testing. Its multiple test voltages make it the ideal tool for many troubleshooting, commissioning, and preventative maintenance applications.

Take advantage of the 1507 full feature set to easily and quickly perform advanced insulation resistance testing. Its handy size and light weight make it easy to pack and use. Additional features, like the remote probe, save both time and money especially when performing repetitive tests. And its reasonable price and rugged reliability make it an excellent value.

The Fluke 62 MAX+ Handheld Infrared Laser Thermometer delivers the accuracy you need in an extremely rugged package. Just point, shoot, and read the temperature of many types of equipment. Get accurate readings form transformers, motors, pumps, panels, breakers, compressors, duct, steam lines, valves, and vents.

Easy to use
The IR thermometer’s small size and versatile features make it extremely easy to use. Plus, the lightweight form factor clips comfortably to your tool belt or belt loop, or easily fits in your toolbox. The 62 MAX+ offers a wide variety of features to take measurements quickly:

High and low alarms for rapid detection of measurements outside the limits
Displays Min/Max/Avg/Dif
The minimum, maximum or average temperature, or the difference between two measurements
Easy to read, even in dark areas with large, backlit display

The 393 FC CAT III 1500 V True-rms Clamp Meter with iFlex is designed for solar photovoltaic (PV) installation technicians and maintenance professionals who work in high voltage dc environments: PV arrays, wind power, electric railways, data centers battery banks for uninterruptible power supplies. The clamp will measure up to 1500 V dc, 1000 V ac, and up to 999.9 A dc or ac through the clamp jaw. The included iFlex flexible current probe extended ac current measurements up to 2500 amps. This clamp has a thin jaw, giving you access to cables in crowded combiner boxes. Test leads are designed with your work in mind, and are also rated to CAT III 1500 V dc.

The Fluke 377 FC true-rms clamp meter uses FieldSense™ technology to make testing faster and safer, all without contacting a live conductor. You get accurate voltage and current measurements through the clamp jaw. Simply clip the black test lead to any electrical ground, put the clamp jaw around the conductor and see reliable, accurate voltage and current values on the display.

All selectable by means of a 10 position rotary selector (including OFF position). In addition there are the HOLD key to hold the displayed value, the R key for manual selection of measuring ranges, the REL key for relative measurements and SEL key for selection between Frequency and Duty Cycle or for selection of DC and AC Current measurements.

The selected quantity is displayed with indication of measuring unit and active functions.The instrument disposes of an Auto Power Off function consisting in an automatic switching off 15 minutes after last selector rotation or function selection.

This meter performs the below listed measurements:
• DC and AC TRMS Voltage
• DC and AC TRMS Current
• Resistance and Continuity test
• Frequency
• Capacitance
• Diode test
All selectable by means of a 10 position rotary selector (including OFF position). Functions keys are also available (see chapter 4.2). An analogical bar graph is also available. The selected quantity is displayed with indication of measuring unit and active functions.

The instrument disposes of an Auto Power Off function consisting in an automatic switching off 30 minutes after last selector rotation or function selection.

Tenmars TM-8X series thermometer is a digital thermometer use for thermocouple type. Build in  microprocessor and high resolution analog to digital converter chip. The thermocouple probe has fast response, measure wide ranges, easy change shape and popular prices. This popular used to industry and
homes.

Test for poles of the 3-phase power source, L1/A, L2/B and L3/C, and identify which phase for which wire.
 Determine the 3-phase motor’s direction of rotation (clockwise or counterclockwise) and the circuit status
of the motor wires.

TM-4XX series measures air speed ,temperature and humidity. It is ideal for spot measurements at air outlets on account of its 30mm vane. In addition to air speed and temperature, TM-404 and TM-414 also measures air moisture and absolute pressure. In this way, air conditions can be reliably checked.

TM-4XX series measures air speed ,temperature and humidity. It is ideal for spot measurements at air outlets on account of its 30mm vane. In addition to air speed and temperature, TM-404 and TM-414 also measures air moisture and absolute pressure. In this way, air conditions can be reliably checked.