B S Safety System

Corporate

• Made of Special Flexible Material (Poly Urethene).
• It contains Three Reflective Bands.
• Size - 750 x 80 x 200mm.
• Very Durable.
• Single Piece, no Joint.
• Quickly Restored to its original shape without doing and damage to Spring Posts as well as Vehicles.
•  Fixed on the road surface with the help of Three Fastener Bolts and special Epoxy bond.

• These Delineators are suitable for all kinds of roads.
• These Delineators helps in avoidance of accidents, there reflectors give best reflective performance to show the road geometry during day and night.
• These bollards also helps a driver to keep them away from road hazards.
• Recommended application on centre medians, verges, bridges, flyover's etc.

• Easy to install and solid structure due to built-in SUS-made bolts.
• Possible to mount on any guardrails with movable bracket.
• Streamlined shape is not affected by wind.
• Various bracket options for guardrails, PE guard walls, concrete barriers.

• Saftey Light bar is electronically controlled safety devices which helps in controlling traffic during night time.
• Visible from distance in the dark, it provides signal to the distant motorists.
• LED and fluorescent cast vinyl film in the bar emits highly visible signals.
• Fitted with flashlight, Light Bar is powered by two battery cells, it can be operated by two-way switch for blinking as well as flash light.
• Made of polycarbonate material it is exceeding durable and crystal clear transparent.
• Safety light bar has been designed with electronic chip, equipped with rechargeable battery.
• Florescent cast vinyl film is used inside the bar to emit highly visible signals.

• Made of one piece polycarbonate lens which is damaged resitant.
• Not effected with any type of light ray.
• Light weight and secure fixing.
• Complete with mounting hardware.
• Will not produce toxic fumes if burnt.

• Suitable for use in public places like banks, hotels, exhibition andevents for maintaining order.
• Made from high quality Stainless Steel.
• Suitable for cordoning off certain areas which need to be kept away from disturbance.
• Useful in organising mismanaged crowd.
• Logo or message can be printed on belt.

• Guard Rail reflectors with metal base is used on the Side of crash barrier along the highway.
• Reflectors can also be fitted on both sides of the metal base. It perfectly delineates the road direction and helps driver in the night driving.

• LDS is made with bright, durable Prismatic Grade sheeting technology with unique crimped wave pattern which provides superior visibility- even at high entrance angles.
• LDS is available in various colors.
• It is easy to install & is a low-cost safety device which helps to avoid accidents on roundabouts and medians.

• Caution Tape (also known as warning tape or police tape) is resilient plastic tape of a signal colour or highly contrasting colour combination (such as yellow-black or red-white).
• Strong and Highly Visible.

• Aluminum Road Stud includes with nails, without nails, with shank, and without the shank. The studs are made of high-quality Aluminum high pressure die castes material and can withstand a compressive load as per the ministry standards.

• Plastic Road Studs: It is a retroreflective safety device used in road marking. Road studs with proven successful installation in various locations such as motorways, walkways, car parks and cycleways, these road studs provide guidance and advanced warning to drivers. They are are particularly valuable in fog and are largely resistant to damage from snow ploughs.

• The Solar Road Stud shall be produced from an engineered polymer selected for superior impact resistance and weather-ability. The top of the marker should be transparent for solar charging and light output in active mode.

The Guardrail Beam is a "W" profiled corrugated beam of 4318/4124mm long made out of steel strip of 3/2.67mm thick having minimum yield strength of 345 N/mm³. The beam shall have a formed width of 312 mm and depth of corrugation as 83 mm for W beam and 515 mm for the three beam.

All the beam are hot dip galvanized and having a mass of Zinc coating as 550 gm/sqmtr. at any single point.

• B.S. Saftey Speed bumps are highly resistant to severe impacts and harsh weather conditions.
• Its interlocking sub units make it bind perfectly into a one firm bump.
• The per-colored material (Black/Yellow) and UV stabilizers keep them perpetually colorful, Studded with reflectors on either side, they are clearly visible to the motorists during night hours. These bumps are ideal for Private Colonies, Hospitals, Educational Institutes, Security Check Posts, Parking Areas, Loading Sites, Factory Complex or anywhere it is desired to control the speed of moving vehicles.