BANSAL ROOFING PRODUCTS LIMITED

Corporate

• Pre Engineered Building (PEB) is a concept of structure having high structural strength, economical design while it supersedes the conventional fabrication, it lowers down the stress of foundation, hence there is less cost on civil construction as well. • Tailor made buildings based on client’s requirement and actual design calculations using tapered sections. An efficiently designed Pre Engineered Building (PEB) can be lighter than the conventional steel building by up to 30%. • BANSAL is well equipped to produce Pre-Engineered Buildings (PEB structure) as per client’s requirements. The company has all the latest machinery to support this segment. The entire design of Columns, Rafters and other Accessories is based on international structural standards and invoice high technical welding and quality production. • These are the PEB structures basically manufactured/fabricated at the factory with the high tensile steel material by collecting complete information of shed/building (viz: Length, Width, Height etc.)

Salient features of our profile : • Best balance between coverage and strength • High ribbed profile for better support on longer spans • High trapezoidal crest for adequate drainage and aesthetic appeal • Hexagonal trapezoid for best load distribution • Anti capillary groove to ensure zero leakage as a result of capillary action • Scientific design for usage in high wind load areas also • Suitable for Roofing/ Cladding/ Barricading and other applications Application of Colour Coated Roof Sheets: Right Product for right Applications: • Choose correct material/thickness/profile/coating for all application • Thickness : 0.5mm TCT for general use, for long spans, use higher thickness • Bansal 1000 Profile suited to handle most applications, only under very special requirement of very high wind loads(severe cyclone areas only) we recommend higher corrugation profiles • Where interlocking formation is needed we recommend softer material like normal PPGI / PPAL

Colour Coated Roofing Accessories are ornaments of factory sheds. Perfect design of accessories assures the leak proof building. At Bansal Roofing, we take utmost care while offering colour coated roofing accessories to our client. We understand and offer the perfect accessories. Some of the accessories are as below. • Ridge flashing * Corner Flashing * Gabble End Flashing * Apron flashing * Drip Flashing * • Expansion Flashing * Reverse Flashing * Water Channel ( Gutter) * “U” Flashings * Curve Flashing etc. Louvers: Louvers are required in the factory to increase air circulation. Can be fixed between two purlins.

If PPGI/PPGL/PPAL products are to be stored for any time prior to forming or installation, they must be stored in dry, well ventilated conditions. Storage which allows water (including condensation) to be trapped between the sheets may damage the coating beyond repair. Pre-painted steel products must be handled carefully during transport, fabrication and fixing to avoid damaging the surface.