G P NET

Corporate

TWO PART EPOXY

MANUFACTURED BY EPOXYSET INC, USA

EPOXIBOND-25007 LOW VISCOSITY, HIGH TEMPERATURE ADHESIVE

EPOXYBOND-25007 is unfilled, low viscosity, heat curing, high temperature resistant epoxy adhesive. It maintains high lap shear strength up to 210°C and has excellent thermal and chemical resistance. It can be used for bonding, coating, and sealing applications where a thin film with high insulating resistance is required, particularly at elevated temperatures. It is recommended for bonding metals, glass, and ceramic substrates. It has long pot-life and has an amber color change upon cure.

FEATURES & APPLICATIONS

• Semiconductor : Wafer to wafer bonding; MEMs devices; flip chip underfill.
• Hybrid : fiber optic, hermetic seals and high temperature packaging sensors.
• Fiber Optic : Sealing fiber into ferrules, transmitting light in the optical pathway, Fiber component packaging; adhesive for active alignment of optics, environmental seal of opto-package, V-groove arrays
• Medical : Potting fiber optic bundles into ferrules for light guides and endoscopes; Capable of resisting several sterilization techniques; Certified USP Class VI for Biocompatibility Standards; adhesive for catheter devices.
• Electronics Assembly : Used as dielectric layer in the fabrication of capacitors; laminating PZT ferroelectrics; Impregnating windings in motors and inductor coils; Bonding ferrite cores and magnets; Structural adhesive for electronic components

OPTICAL CONNECTOR CLEANERS

We offer optical connector cleaners from one of the pioneers of the industry, NTT Advanced Technology corporation, Japan

The cause of many troubles in optical communication equipment is contamination on the end face of optical connectors. Because the optical fiber core, which transmits the communication light signal, has a small diameter of only 10 microns, even a small spot of contamination, which may be invisible to the naked eye, may affect transmission performance and cause communication failure. To avoid communication failure due to contamination, it is necessary to clean the optical connector end-face just before making the connection. NTT Advanced Technology’s optical connector cleaners use fiber developed specifically for optical connectors, so even the smallest contaminants not visible to the naked eye are removed.

We can offer you high quality, economically priced Fiber Optic Connectors & Adapters from Acon Optics, Taiwan. The major features of these connectors include :

• One-piece type or multi-piece type for assembly options
• 0.9, 2.0, 3.0mm cable diameter available
• Colored boots for choices
• Telcordia GR-326, JIS C5970 type, IEC 61754-13, RoHS2, REACH, UL94V-0 standard compliance
• Economical in both design and termination process
• Snap-in connector design precises the mechanical dimensions
• Reduces assembly time and simplifies training
• Reduces maintenance and creates consistent optical performance 

RESIN BOND - DIAMOND & CBN GRINDING WHEEL

Enriched with vast industrial experience, we are involved in offering a wide range of Precision Grinding Wheel. Our Precision Grinding Wheels are engineered using best quality components and following international standard. These can be availed in various range and technical specifications and range as per the precise demands and requirements of clients.

Resin Bond Diamond & CBN grinding wheels are the most commonly used grinding wheels for grinding of Carbide Tools. Resin Bond Wheels, as the names describes, is a combination of resins and fillers pressed under heat and pressure that are easily dressed to straight, angle forms and special radius forms. Very Fine finish can be achieved using resin bond products.

INDUSTRIES USED

• Carbide Tool ( Fluting, gashing clear edge and relief angle, OD grinding of the tungsten carbide, HSS, milling cutter, reamer and drill etc)
• Ceramics
• Glass
• Quartz
• Thermal spray
• Other specialty materials
   

FEATURES

• Excellent Grinding Action
• Free Cutting
• Long Life
• Edge Stability
• Convenience and Ease of Use
• Customized Bonds as per application
   

TYPES OF GRINDING

• Surface
• OD
• ID
• Center-less
• Tool & Cutter
• Fine grinding
• Double disc grinding
• Slot grinding
• PCD
   

MATERIALS

• Glass & Ceramics
• Carbides
• Stone
• Edge Stability
• Quartz, Silicon other specialty materials
• Titanium Graphite Composite

UVC STERILIZATION BOX

Highly efficient and compact UVC Sterilization Box manufactured by GaN Power Tech, Taiwan (in alliance with NTT- AT, Japan).

With high-output and powerful ultraviolet LED (UVC: wavelength 260-280nm), our high-efficiency sterilizer kills 99.9% of the bacteria and viruses on your belongings in just 90 seconds.  

Not to worry about chemical residues as it doesn’t require the use of any chemical substances such as alcohol, etc. Moreover, the UV lamps turn off as soon as you open the lid of the box to ensure your safety and security.

Offers wide storage and evenly sterilizes all the surface with 360°LED radiation. 

Use 

  In your home and office

• Keep it at entrance or in your office
• Sterilize your belongings whenever you reach home or periodically

At your business

• Display eyewear, jewellry, watches after trial
• Combs & scrissors after every use at beauty saloons
• Locker keys at sports complex / gymnasiums
• Rental audio guide at museums