K-PAS INSTRONIC ENGINEERS INDIA PRIVATE LIMITED

Corporate

This ORVM Manual Folding Durability Tester is a TestingEquipment Manufactured by K-PAS tests the Durability of theMirror by Moving the Mirror in the applied directionscontinuously.
The current testing will be used to test the MM5Model.
 The Maximum number of Mirrors which can be testedsimultaneously is 6 Mirrors.
Our Manual Folding Durability Tester uses the Latest AllenBradley PLC and its HMI so as to get fast and accurate Resultsfor the UUT(Unit Under Test).
The Manual Folding Durability test are done both in ManualMode and in Auto Mode .
There are two Servo Motors connected to the Mirror setup torun the Folding and the Unfolding Process continuously for along time.
 

This Actuator Manual Durability Tester is aTesting Equipment Manufactured by K-PAS which tests the Durability of the Mirror by Moving the Mirror in the applied directions continuously.The current testing will be used to test the MM5Model.
The Maximum number of Mirrors which can betested simultaneously is 16 Mirrors.
Our Actuator Manual Durability Tester uses theLatest Allen Bradley PLC and its HMI so as toget fast and accurate Results for the UUT(UnitUnder Test).
The Number of Cycles Run corresponds with theDurability of the Mirror i.e., the Longer theMirror is tested without any problems, the better the Durability.
 

Additional Information:

• Production Capacity: AS PER ORDER
• Delivery Time: 6-8 WEEKS
• Packaging Details: SEAWORTHY PACKAGING

Extensively applicable in PLC programming, the range of Cluster Endurance Test Rigs that we offer is specifically manufactured using excellent grade components and with the aid of latest technologies. Post manufacturing the range undergoes stringent checks and tests to ensure delivery of only defect free range at client’s destination.

Remarkable characteristics:

• Resistance against corrosion and wear and tear

• Durable and reliable

• Low maintenance requirement

Keeping a tab on the industrial advancement and client’s changing requirements, we have been able to design and manufacture a functionally efficient range of Leak Testing Machines. Designed in compliance with industry standards, these electro mechanical instruments are basically used to test leakage of vacuum and air in various industrial components.

The range is gaining high demand in the market due to their:

• Preciseness

• Low maintenance requirement

• Easy working

This Electric Durability Tester is a Testing Equipment Manufactured by K-PAS tests the Durability of the Mirror byMoving the Mirror in the applied directions continuously.
The current testing will be used to test the MM5 Model.The Maximum number of Mirrors which can be testedsimultaneously is 6 Mirrors.
Our Manual Folding Durability Tester uses the Latest AllenBradley PLC and its HMI so as to get fast and accurate Resultsfor the UUT(Unit Under Test).
The ELECTRIC Folding Durability test are done both inManual Mode and in Auto Mode . 
The Mirrors (UUT) are placed inside the CHAMBER which isused to HEAT and COOL the UUT’s where they are tested indifferent Temperatures to ensure their Durability upon use inVarious Regions with Different Climatic Conditions
 

Additional Information:

• Production Capacity: AS PER ORDER
• Delivery Time: 6-8 WEEKS
• Packaging Details: SEAWORTHY PACKAGING

-PAS Core Squeezing and Sizing Machine is developed to reduce the size of Core and Mantle upon a specific time period in a continuous interval.

·       This machine is used as a Production Unit.

·       K-PAS Core Squeezing and Sizing Machine is developed based on combining Electrical, Mechanical and Hydraulic procedures.

·       Hydraulic Items used in the Machine are Hydraulic Cylinder, Solenoid Valve, Motor, and Pressure Switch which are used to control the movement of the Cylinder where the part is compressed and decompressed.

·       The Mechanical Components installed in the Machine comprise of Frame to support.

MECHANICAL:

          The Machine consists of MS Base Plate which is mounted with the Fixtures and mounted on Anti Vibration Pads with wheel. The Squeezing Component is placed on top of the Base Plate which is connected with the Cylinder.

HYDRAULICS:

          Hydraulic Power Pack is placed behind the Machine Table. This setup is made of Pressure Gauge, Check Valves, Solenoid Valves which are all interlinked with the Motor Setup, Hydraulic setup and the Squeezing Cylinder. All cylinders and the valve parts number and the make are standard type and we have mentioned those in the Hydraulic Schematic Diagram.

K-PAS Instronic Engineers India Private Limited has established in the year 1990 which is widely involved in manufacturing and also in supplying a extensive range of products which includes Power Equipment such as DC Power Supplier, Voltage Stabilizers, Battery Dischargers, DC Inverter and Special Purpose Machines (Poka Yoke System and Special Purpose Machine) and Electrical Equipment (Resistive Loads, Fuel Cell Products, Durability Listing Equipment, Automation Products and Cathodic, Dispondment Meter).
We are recognized in the market for offering the product range with defect free, cost effective prices and timely deliveries of consignments. We keep ourselves updated with the latest trends and industry standards to meet the requirements of the clients.

Backed by years of industry experience and immense expertise in the domain, we are engaged in manufacturing and exporting a precision designed array of Special Purpose Machines. Extensively used for several industrial applications, these machines are precisely manufactured making use of superior grade raw material and components, procured from renowned vendors of the market.

Features:

• Precision designed

• Functionally efficient

• Easy installation

• Reliable and durable

K-PAS MULTI OUTPUT DC POWER SUPPLY with mA SOURCE is a Rig which supplies constant Voltage and Current and Milli Amps Source and Sense according to the requirements.

We have provided a Variable Milli Amps Source and Sense along with Variable Voltage and Current respectively according the user requirements for Output 3 and Output 4.

The Output 1 is also Variable Voltage Supply which generates 0-26V/10A unlike the Output 2 which is constant supply of 15V,-15V/1A.

This rig is used to give source and sense for the MFC (Mass Flow Controller) and testing it.

Output 1 and Output 2 can be used simultaneously while we can use either Output 3 or Output 4.

Esteemed clients can avail from us a comprehensive range of DC Power Supply devices, which is fabricated using the finest material that is sourced from the eminent and trusted organizations. Duly checked on varied quality parameters and approved, these devices are widely used to operate several electronic and electrical equipments. Further, the range is carefully packed and timely delivered at client’s end.

Features:

• High efficiency

• Reliable and durable

• Optimum performance

K-PAS Programmable DC Power Supply is a single variable 0-20V power supply which can deliver a load current of 0.1-100.0A

The Power Supply is forced Air cooled using the best type of Heat sink available and is housed in an enclosure which is sturdy, attractive and easily accessible for servicing.

This method employs the pulse generating oscilloscope which is connected to the power supply.

This method is used for Electro-Chemical process such as ionization and plating purposes etc.

Additional Information:

• Item Code: KM-064
• Production Capacity: BASED ON QUERY
• Delivery Time: 3-4 WEEKS
• Packaging Details: SEAWORTHY PACKAGING

We are one of the well recognized manufacturers and exporters of a precision designed array of Power Supply Systems. Designed and developed in adherence with international standards and norms, these systems come integrated with switching regulators that help in providing required DC output voltage.

Owing to below mentioned attributes, these are running high in demand in electronics, computers and automotive industries:

• High performance

• Robust construction

• Easy and safe to use

K-Pas Instronic Engineers India Private Limited has established in the year 1990 which is widely involved in manufacturing and also in supplying a extensive range of products which includes Power Equipment such as DC Power Supplier, Voltage Stabilizers, Battery Dischargers, DC Inverter and Special Purpose Machines (Poka Yoke System and Special Purpose Machine) and Electrical Equipment (Resistive Loads, Fuel Cell Products, Durability Listing Equipment, Automation Products and Cathodic, Dispondment Meter).
We are recognized in the market for offering the product range with defect free, cost effective prices and timely deliveries of consignments. We keep ourselves updated with the latest trends and industry standards to meet the requirements of the clients.

Minimum Order Quantity

1 Unit

Usage/Application

Industrial Automation

Output Voltage

0-20 V DC

Input Voltage

415 V AC / 3 PHASE 50HZ

Output Current

100A(ANY RANGE)

Working Humidity

35-45 DEGREE

Cooling Method

AC FAN

Country of Origin

Made in India

Material

Stainless Steel

Automation Grade

Semi-Automatic

Color

Standard

Type

Electric Test Bench

I Deal In

New Only

Country of Origin

Made in India

We are instrumental in offering an outstanding range of Portable Battery Chargers, which is designed and developed by making use of superior quality component and latest technology. Available in different specifications to suit the miscellaneous requirements of our clients, these compact sized chargers find their application in different industry verticals. 

Salient attributes:

• Less power consumption

• Optimum performance and efficiency

• Longer working life

In order to meet the application specific requirements of the clients, we have added best in industry Testing Equipment in our extended range of electronic & automation products and special purpose machines. Designed with advanced features and functionalities in tandem with international standards and norms, these machines are running high in demand due to following attributes:

• High performance

• Accurate results

• Low maintenance requirement

• Durable finish standards

Owing to our expertise in this field for about 29 years, we bring with us an exclusive range of Resistive Load Banks in accordance with the customer requirements which are carefully Designed and manufactured by our Adept Professionals using high-quality raw material and Innovative Technology in accordance with the requirements of the clients thus bringing customer satisfaction.
We have supplied a minimum capacity of 1000A resistive Load Bank for both single Phase and 3 phase connections.
Digital or Analog meters can be given as per requirement.
Our clients avail these Resistive Load Banks from us at reasonable prices.
Our Clients range from IIT colleges to Industry Giants like Hyundai,Emerson,SMR,Nippon,Dong AH, Nissan, Royal Enfield and many others,even Government Organisations such as CVRD,CFCT etc.
 

K-PAS Load Bank is a device which develops an electrical load, applies the load to an electrical power source and converts or dissipates the resultant power output of the source. A Load Bank is intended to accurately mimic the operational or “real” load which a power source will see in actual application.

Additional Information:

• Item Code: KM-745
• Production Capacity: 1 PER 4-6 WEEKS
• Delivery Time: 4-6 WEEKS
• Packaging Details: SEA WORTHY PACKAGING

To meet the variegated needs and demands of clients in varied industries, we bring forth highly accurate range of Load Banks. Fabricated using high grade raw material in compliance with industry defined standards, these devices are widely used to develop electrical loads for effective execution of different industrial applications. Post manufacturing the range is stringently checked and tested on varied parameters to ensure defect free delivery.

Current

MIN 1 AMP to 500 AMPS

Charger Type

Digital

Output Voltage

CUSTOM

Input Voltage

230V AC/415V AC

Country of Origin

Made in India

Type

Battery Charger

With the efficient support of our highly skilled and experienced professionals, we offer an incomparable range of AC Power Loads. Manufactured using best grade raw materials and advanced technology, these custom designed loads are widely used for separation of substances that are having variable densities.

Highlighting attributes:

• Less time and power consumption while functioning

• Technically improved and precision designed

• Reliable and durable

With the efficient support of our highly skilled and experienced professionals, we offer an incomparable range of AC Power Loads. Manufactured using best grade raw materials and advanced technology, these custom designed loads are widely used for separation of substances that are having variable densities.

Highlighting attributes:

• Less time and power consumption while functioning

• Technically improved and precision designed

• Reliable and durable

Minimum Order Quantity

1 Piece

Country of Origin

Made in India

PRECISION

PLC USED

PUNCH PRESSURE

7 BAR

GUARD PRESSURE

2 BAR

INPUT VOLTAGE

230V AC, 50HZ

Type

Hole Punching Machine