Paramount Import Export Corporation

Corporate

This PIEC Polymer Earth housing pit is manufactured
from heavy high‐grade polypropylene for high
strength & Stress levels to absorb a maximum load of
5000kg. Stabilised against degradation by non‐brittle
and by sunlight to prevent cold weather damage. The
light weight feature allows easy handling, storage and
transportation, thus increasing installation efficiency.
Termination area is increased by 100% due to simple
locking of two units together, allowing deeper
electrode connections to be made and reducing the
effects from harmful voltage gradients.

This PIEC Polymer Round Earth housing pit is
manufactured from heavy high‐grade polypropylene
for high strength & Stress levels to absorb a
maximum load of 5000Kg. Stabilised against
degradation by non‐brittle and by sunlight to prevent
cold weather damage. The light weight feature allows
easy handling, storage and transportation, thus
increasing installation efficiency. Termination area is
increased by 100% due to simple locking of two units
together, allowing deeper electrode connections to
be made and reducing the effects from harmful
voltage gradients.

This PIEC Product Earth housing pit is manufactured
from heavy high‐grade polypropylene for high
strength & Stress levels to absorb a maximum load of
5000kg. Stabilised against degradation by non‐brittle
and by sunlight to prevent cold weather damage. The
light weight feature allows easy handling, storage and
transportation, thus increasing installation efficiency.
Termination area is increased by 100% due to simple
locking of two units together, allowing deeper
electrode connections to be made and reducing the
effects from harmful voltage gradients.

PIEC Concrete Earth Pit is suitable for load rating to
5000 kgs. And can have an internal Earth Bar (5 hole
OR 7 hole) fitted diagonally across in slots provided
for multiple connections. It is made with a
propitiatory mortar formulation with advanced
polymer fibers & glass fibers for light weight, it also
offers water resistance (low porosity) & high
insulation properties, long life, Stability under all
weather conditions.

PIEC Concrete Earth Pit is suitable for load rating to
5000 kgs. And can have an internal Earth Bar (5 hole
OR 7 hole) fitted diagonally across in slots provided
for multiple connections. It is made with a
propitiatory mortar formulation with advanced
polymer fibers & glass fibers for light weight, it also
offers water resistance (low porosity) & high
insulation properties, long life, Stability under all
weather conditions.

PIEC Concrete Earth Pit is suitable for load rating to
5000 kgs. And can have an internal Earth Bar (5 hole
OR 7 hole) fitted diagonally across in slots provided
for multiple connections. It is made with a
propitiatory mortar formulation with advanced
polymer fibers & glass fibers for light weight, it also
offers water resistance (low porosity) & high
insulation properties, long life, Stability under all
weather conditions.

The Dissipative Earth Seal is fitted when the earth rod connection is below the water level and where there is a possibility of water
entering the inspection housing from below ground. PIEC earth seals are specifically designed to suit earth Rods of Various
diameters from 1/2” to 3/4”. These seals are used along with PIEC Earth Pits.
• Prevents the ingress of ground water into and surrounding the inspection housing.
• Waterproofing is achieved by enclosing an upper section of copper – bonded ground rod within a plastic pipe with seals
located on both sides of the concrete pour.
• The two plate‐style flange serves to reduce pressure, which may occur from the capillary effect of water on the outside
of the seal and inspection housing.
• The flanges are intended to prevent water pressure from “popping” the inspection pit out of the concrete.
• Delivered as a Earth Seals, including a 3.3 foot (1.0 meter) for double seal & 1.0 foot (0.30 meter) for Single seal PVC
pipe, to be adjusted to site conditions.

The Dissipative Earth Seal is fitted when the earth rod connection is below the water level and where there is a possibility of water
entering the inspection housing from below ground. PIEC earth seals are specifically designed to suit earth Rods of Various
diameters from 1/2” to 3/4”. These seals are used along with PIEC Earth Pits.
• Prevents the ingress of ground water into and surrounding the inspection housing.
• Waterproofing is achieved by enclosing an upper section of copper – bonded ground rod within a plastic pipe with seals
located on both sides of the concrete pour.
• The two plate‐style flange serves to reduce pressure, which may occur from the capillary effect of water on the outside
of the seal and inspection housing.
• The flanges are intended to prevent water pressure from “popping” the inspection pit out of the concrete.
• Delivered as a Earth Seals, including a 3.3 foot (1.0 meter) for double seal & 1.0 foot (0.30 meter) for Single seal PVC
pipe, to be adjusted to site conditions.

Full pre cast concrete body and Cast iron cover. High specification reinforcement. With suitable work space internally. Suitable for Earth / Ground Rods & Pipe in pipe /Chemrods installations. Cast Iron Lid is pre coates with Zinc paint after that coated with paint for long usage life.

Full FRP Polymer (polyplastic) construction. Grey lid for light�(load 5�ton) applications walk ways (etc). Suitable for Earth / Ground Rods & Pipe in pipe /Chemrods installations. Supplied with its opening key. U/v stabilized .

FRP Polymer product (Polyplastic) . Medium load weight (5 tons). SELF LOCKING (BUILT IN LOCKS). Available in Green lid Black body or Green lid Green body

Galvanized cover hinged. Size :310 x 310 x 175 (h) mm