SANGITA GAYALAL YADAV

Corporate

Offered for installation by chemical bonding with tiles molded with a durable backing material, specified as natural rubber. For chemical bonding, the lagging is supplied in standard strips holding rows of tiles.

Unlike hot vulcanised lagging, it is easy-to-handle.

It is also supplied as per size of the pulley to suit easy installation.

Ceramic-in-rubber pulley lagging is used in applications where additional wear and higher Coefficient of friction is required.

Helps extend the life of key conveyor components. May allow a reduction in the size of the required drive, take-up, etc.

Reduces wear from abrasive materials

Prevents belt slippage by increasing the coefficient of friction between the belt and the pulley.

Creates a self-cleaning action on the pulley surface and prevents the buildup of transported material, water, snow or ice.

The new lagging with ceramic inserts has been designed for use in difficult wet and muddy working conditions, common in gold, copper, iron ore, coal, lime stones and steelworks, to eliminate belt slippage.

RealBond Ceramic Bonding Material is Two Part System which gets polymerised and bond nearly any metal, concrete with the ceramic, glass, wood, etc. with very high strength.

Features & Benefits

• Ceramic filled and hence have nearly the same property of parent material.
• Superior adhesion to almost all clean surfaces.
• Protection against corrosion, abrasion, etc.
• Gets cured in short time and increases the work output.

Features a metallic filled system which gets cured within 10 minutes after mixing. It is a 100% Solid System which gets cured under high humidity, even under water and temperature up to 5 degree Celsius.

It is an excellent, products for emergency lo- cost repair to all under water/humid condition.

Features & Benefit

• Fast and emergency repair that can be reduce the downtime.
• Fast mixing & easy application.
• Bonds to almost all material.

The System can be used even underwater/high humidity, avoids all relevant problems of hot process.

Typical application emergency repair to elbow, tank, cooling towers, dam, pumps, vessels, pipes and many other emergency applications

100% solid, high strength, specific metal content machinable systems for economical and dependable maintenance and permanent repair works.

Salient Features

• Versatile repair of metal and glass against corrosion.
• Can be machined like metal after curing.
• No twisting, bending, internal stresses as faced in welding.
• Economical compared to welding of Titanium, Aluminium, etc.

Typical Application

Repair corroded areas like impeller, casing, propeller shafts, tanks area.

Repair specialised metal parts like aluminium, gunmetal, titanium etc.

Cooling system of vacuum furnaces, fractured castings, prototype parts/patterns, can be repaired/prepared.

Can be used to repair floating roof of tank and to fill gap between heat exchanger tube sheet and tube

These products are non-machinable ceramic filled fibre reinforced that adhere to almost all surfaces. It is specifically useful when corrosion and erosion is encountered.

 Salient Features

• Versatile to repair any metal in corrosion and acidic area.
• To get optimum result these can used combined with Carbide & Microbead compound also.

Typical Application

• Chemical pump casing, impeller, glass lined vessels, propeller blade of a ship, acid spill over an area where erosion and corrosion is encountered due to acid, etc.
• Used in place of rubber lining /Teflon lining to get more life, if erosion is encountered