SHREE RAM AIR-TECH

Corporate

E-Cool 6V1.0 Evaporative Air Cooler to our clients. Balancing the need for comfort and the cost of providing comfort has always been a challenge. Air-conditioning delivers the maximum comfort, but consumes a lot of energy and reduces air freshness. Air coolers are another conventional way of cooling, but fail to provide the required cooling to ensure comfort in all seasons.The HMX-IDECool is an upgrade over conventional air-coolers using HMX’ patented Indirect Direct Evaporative Cooling technology (also known as two-stage evaporative air cooling).

The Imported Duct Cooler has resistant to UV rays can be kept outdoors. It is not impacted by heat and sunrays. It has four side suction of Air and One side cool fresh Air Outlet. All four sides it has 4 inch thick Honeycomb Cooling Pads.

Features

• As compared to other Industrial Air Coolers which hardly has thickness upto 2 inches.
• Himalaya Kapsun has 4 inch thick honeycomb air cooling pad.
• The Total Pad area for Himalaya Kapsun is also very high
• so more surface area more will be the cooling.
• Kapsun Himalaya Air Cooler have wheels can be easily portable in your area.
• Himalaya Air Cooler has a protective louver from the backside for preventing the dust particle to enter and also damage protection.
• The Height of Himalaya Air Cooler is 4 feet thus there is proper Air Flow at a very suitable height.

Features:

• High efficiency and reliability
• High efficiency (80%+) long life 100mm pads.
• CNC fabricated High quality galvanized steel casing.
• PowderCoated Waterproof lining in water tank.
• Choice of Top, Bottom and Side discharge.
• Quick and easy removal of cooling pad.
• DIDW AMCA certified Centrifugal Blower.
• Designed for low RPM for lower noise levels and trouble free operation.
• High volume low head pump.

Features:

• No chemical refrigrents or ozone depleting chemicals.
• Double skin casing made of PPGI sheet.
• High efficiency (90% +) long life Ecocool Evaporative Cooling Pads.
• Provided with water intake and drain water pipe lines.
• DIDW high efficiency centrifugal dynamically balanced fans.
• High techonogy, polymer heat & mass exchanger.
• Option of running as direct & indirect Evaporating Cooling mode.
• The heat exchanger is made of engineered polymer.
• Duct connection frame.

Motor type- PSC

• Speed max (rpm)-1350
• Output Watts max- 750
• Overload & Fuse - Auto reset & “one shot” fuse
• Enclosure-IP54

Pump Type-Centrifugal

• Motor-Synchronous
• Rating Watts (input)- 25
• Flow rate (L/min)- 21
• Voltage / Phases / Hz- 230 / 1 / 50
• Overload- Auto reset
• Enclosure rating- IPX4

Tent Cooler front Plastic grill Circular New Design Grills
Much more Air Flow Due to the New Design my the Nuspak Innovative Design Sophisticated and Attractive Design
30 inch Plastic Fan high Air Flow Delivery
Light in weight easy Loading and unloading of the Coolers
Heavy Duty wheels good load carrying Capacity
Good Aesthetic of Cooler 
Over the Years also Black Colour and the Apperance wont change

30 inch Fan White Colour Body PP Body
4 inch Thick Honeycomb Cooling Pads
7090 Type Cooling Pads
Heavy Duty Castor Wheels
Durable Body

Features

• Our machine body is made up Of Injection molding process and PP material is used, Body of Kapsun Antarctica is UV protected so that you can keep it in direct sun light. 
• Antarctica is Heavy Duty Industrial Air Cooler meant for Factories, Shop floors and Continous operation 24x7.
• What makes Kapsun Antarctica Most suitable for the Industrial Application the specification.
• Kapsun Antarctica Air Cooler has pure copper winding motor made in the 3 speed manner lesser speed lesser power consumption.
• Kapsun Honeycomb Cooling Pads are 4inch thick of best quaity to give the best output results .

Jumbo air cooler suitable for commercials, tents, hotels, marriage halls, banquettes, resorts.

Built Material: 30 Inch Plastic Bead based nylon fan with very good fan alignment.

Body is Fiberreinforced plastic with high impact resistance for loading, unloading & transporting.

• Jumbo air cooler suitable for commercials, tents, hotels, marriage halls, banquettes, resorts.
• Built Material: 30 Inch Plastic Bead based nylon fan with very good fan alignment.
• Body is Fiberreinforced plastic with high impact resistance for loading, unloading & transporting.
• Strong wheels so as it can be easily moved or transported.
• High strength motor arms so higher stability.

• Jumbo air cooler suitable for commercials, tents, hotels, marriage halls, banquettes, resorts.
• Built Material: 30 Inch Plastic Bead based nylon fan with very good fan alignment.
• Body is Fiberreinforced plastic with high impact resistance for loading, unloading & transporting.
• Strong wheels so as it can be easily moved or transported.
• High strength motor arms so higher stability.

It has high absorbing water, high water resistant, anti-to get moldy and spoil, the service life long and so on merits. Moreover the evaporation relative surface is big, the temperature decrease efficiency reaches above 80%, does not contain the surface active agent, nature absorbing water, the propagation rate is quick, the potency is lasting. A water drop 4-5 second then proliferated finishes.

Oxyair Evaporative Cooling Pad is used in systems where high efficiency cooling is required. It can be used for many different cooling purposes but is particularly suitable for cooling of live stock buildings and greenhouses.

Features

• The basic design is such that the Antarctica air cooler is compact though very powerful. Covers 2500 Sq.ft
• Antarctica kapsun air cooler is most suitable for the industrial air cooling applications .
• Very less power consuming only 0.5 units/hour to cool 1000 Sq.ft as it has 490 W motor. The Cooler Motor is such Efficient in Performance that
• Easy to operate and maintain - Operating Kapsun Air Cooler is Plug and Play and Can be easily cleaned by removing the Cooling Pad from the Backside. 3 Knobs for Speed Controls and 3 Modes of Operations makes the Antarctica Air Cooler ease to use.

Features:

• The whole body of high impact resistant polypropylene material makes it durable.
• Moc of industrial air cooler - big 30" axial fan blade with aerofoil design . It is rustless ,high strength gives high air throw. Whole body of high impact resistant polypropylene material makes it durable.
• Motor of industrial air cooler -it has 3 speed motor fitted with copper winding even suitable for industrial use of 24 hours.
• Power consumption of air cooler - it only consumes 0. 5 units / hour so lesser operation cost with 0. 67 hp motor so less operating cost.
• Movable air cooler - if there is movement of workers within the premises it is movable can be kept in their vicinity for the best performance.
• Honeycomb cooling pads - the heart of the cooler is 5090 air cooling pads with 5 mm flute designed for better cooling efficiency wherein it is treated such that maximum water is adsorbed
• Durable one piece moulded plastic polythene housing.
• Equipped with high performance variable speed motor.
• No need to install, portable, could be used immediately after connecting water and electricity.
• Efficient environmental protection, evaporated with water without harmful refrigerants.

These are Ductable Air Cooling System with Hood , Can Be Easily Installed In Bottom Discharge Fashion , Top Discharge Way,
Advantages of these kind of Air Cooler are These are Compact , Light Weight , Easy to Install , Easy to relocate . Power Consumption is low due to efficient Motor