Zenco Industries

Corporate

What Are They Made From

• The standard materials of construction for these machines are durable stainless steel, approved for high - hygiene use.

Specifications

• Available in a range of airflows from 100 to 25,000m3/hr as STANDARD, the machines fall into a variety of product ranges to meet all likely requirements. Complies with ErP Directive 2015.

Advantages/Benefits

• Sleek, ultra-modern appearance
• Exceptional build quality
• Stainless steel construction
• Low energy consumption
• Very low-noise operation
• Easy to install in small spaces
• Low operating costs
• Easy to clean and keep clean

Regeneration of the desiccant wheel can be achieved using electricity, steam or gas depending on availability, and as the rotor material is the most efficient currently available in the market, the specific energy input for each kg of moisture removed is the lowest in the industry. Independent tests have shown that our desiccant wheel has an 8.5% better moisture removal capacity than the next best competitor's product.

The advanced structure of the drying wheel also allows for this advanced moisture removal with a 25% reduction in pressure drop through the dehumidifier unit, allowing for the selection of smaller and more efficient fans and motors.

Optional Equipment

• Most of the desiccant dehumidifiers we are able to provide can be fitted with pre and post cooling or heating modules, heat recovery systems and as condensing units where the location makes it difficult to take away the moisture.

Capacity (@20 deg.C & 60 %)   -  5 kg /hr

Process Air flow                         -  850m³/hr

Inlet size                                   -  200 mm

Reactivation air flow               -  260m³/hr

Outlet size                             -  150mm

Applied Temperature

Max power                             -   10 KW

Power rating                          -   8KW

Voltage                                    -  220V/50HZ

Current                                   -  12A

Dimension                             - 877 *640*1232 mm

Weight                                   -  140 kg

 
Package                                  -  Wooden case


Certification                            -  CE


KEY DESIGN FEATURES :   1.Zenco rotor

2.Customized filters , G3&G4 efficiency

3.Front & back door design ,easy to check machine 

4.The processed air inlet and dry air outlet are set in  same side ,and the remaind air holes are set in the other sides ,easy for installation 

5.Delay time & earth leakage protection circuit

6.ABB,OMRON and Schneider electrical accessories…

Capacity (@20 deg.C & 60 %)   -  5 kg /hr

Process Air flow                         -  850m³/hr

Inlet size                                   -  200 mm

Reactivation air flow               -  260m³/hr

Outlet size                             -  150mm

Applied Temperature

Max power                             -   10 KW

Power rating                          -   8KW

Voltage                                   -  220V/50HZ

Current                                  -  12A

Dimension                             - 877 *640*1232 mm

Weight                                   -  140 kg

 
Package                                  -  Wooden case


Certification                            -  CE


KEY DESIGN FEATURES :   1.Zenco rotor

2.Customized filters , G3&G4 efficiency

3.Front & back door design ,easy to check machine 

4.The processed air inlet and dry air outlet are set in  same side ,and the remaind air holes are set in the other sides ,easy for installation 

5.Delay time & earth leakage protection circuit

6.ABB,OMRON and Schneider electrical accessories…

We make and supply in shortliest time all types of desiccant rotor cassette. High performance in the industry Best prices and delivery time

(Size 1220 X 200)

We make and supply in shortliest time all types of desiccant rotor & rotor with cassette , rotor with flange . High performance in the industry Best prices and delivery time 

We make and supply in shortliest time all types of desiccant rotor cassette. High performance in the industry Best prices and delivery time

We make and supply in shortliest time all types of desiccant rotor cassette.

(Size 400 X 200)

Hammer fan 600 x 600 x 400 mm Blade Diameter 580mm, Stainless Steel 430 1.2 mm, All frame 0.8mm, Zincoating275/m2 motor: direct drive Nosch 0.37kw, 220v Single phase, ip 55, 100%copper wire shutter: Galvanise steel, 0.40-0.45mm, Wind collector:galvanize 0.8mm, Airflow: 9500cbm/H 

Through the meticulousness of our competent professionals, we are able to manufacture, supply and export optimum quality??Poultry Exhaust Fan. Manufactured using fine-grade mild and hot-dip galvanized steels, our fans are designed keeping in mind of various factors like low noise level, high speed exhaust and safe operation. It is commonly installed in different poultry firms across the word to maintain hygienic environment while reducing the ammonia emission. Our offered??Poultry Exhaust Fan??is known for the following.

Features

• Easy installation
• Hassle-free performance
• Low energy consumption
• Low maintenance cost.

Exhaust Fans

• Catering to the diversified requirements of our clients, we are offering quality assured??Exhaust Fan??which is fabricated by the galvanized steel sheets and other required components. To ensure its salient performance and quality as per the international standards, we garnered the raw material from authentic and well-established vendors of the market. In order to gain utmost client satisfaction, this product is properly checked by our diligent professionals before finally delivering to the clients. Furthermore, it is highly appreciated by the clients owing to its high stability, high strength and greater resistance to corrosion.

Exhaust Fans

• Catering to the diversified requirements of our clients, we are offering quality assured??Exhaust Fan??which is fabricated by the galvanized steel sheets and other required components. To ensure its salient performance and quality as per the international standards, we garnered the raw material from authentic and well-established vendors of the market. In order to gain utmost client satisfaction, this product is properly checked by our diligent professionals before finally delivering to the clients. Furthermore, it is highly appreciated by the clients owing to its high stability, high strength and greater resistance to corrosion.

This is available in single phase and three phase &  It is highly effective in poultry farms and also power consumption is low.

• These type of fans are widely used in poultry farms
• Room temperature can be attained
• Very good for air circulation
• It can be used along with fogger to maintain room temperature
• It control mortality rate during the months of summer
• Very less power consumption
• Highly effective for poultry farm

We offer 18" Heavy Duty Powervent Exhaust Fans to our high esteemed clients.

We offer??ES V800 Exhaust Fan??to our clients.

Other Details

• Qty in 20ft/skd -??84/270
• Qty in 40hq/skd -??216/600

We offer ES V1220 Exhaust Fan to our clients.

Other Details

• Qty in 20ft/skd - 30/180
• Qty in 40hq/skd -94/400

New formulation for an easy-to-apply, air-dry water-based, acrylic coating Heresite’s HereShield is formulated as a low-VOC direct to metal coating. It exhibits excellent corrosion resistance, UV resistance and weathering qualities, along with good adhesion to ferrous and non-ferrous metals without complex pretreatment or primers. Heresite’s HereShield air-dry coating is designed for spray application. Some of its outstanding properties are excellent durability, excellent salt fog performance, good adhesion, good film building characteristics, and flexibility. This single-component coating is typically applied on the internal and external surfaces of HVAC-R heat exchangers and related equipment

To ensure distribution of orders within undertook period, our organization has an outstanding supply chain system in place. As a trustworthy organization, we store the entire lot in a secured manner in our automated and capacious warehouse. The unit is supervised by our team of experts ensuring complete security.

??

Recommended Usage

• FinnCoat-8403 is our top of the line baked phenolic formulation for protecting fine tube and coils from the effects of most severe corrosive environments.
• FINNCOAT-8403 is a tough, extremely durable air dry coating which has a good adhesion, good film building characteristics and excellent flexibility.
• All are self priming to steel.
• When thoroughly aged.
• They produce hard corrosion resistant films.
• The product is recommended as a heavy duty maintenance coating for immersion exposures to splash, spillage and fumes.
• FINNCOAT-8403 is a primer/finish combination specially formulated for salt water fumes services. Successful applications include Fans. duct. fume hoods, marine finishes, swimming pools. steel plants, wastewater treatment plants, textile industry, chemical storage areas.
• Battery storage areas and ventilating systems.
• The product can be spray or dip applied.

Other Details

A high performance modified phenolic coating developed specifically for heat exchangers. The flexibility and corrosion resistance of Heresite P413appreciably increases the service life of your heat exchangeequipment. It is specially suited for coating light gauge metals inequipment operating in severe corrosive environments.

ES-600 is formulated as a direct to metal coating. It exhibitsexcellent corrosion resistance, UV resistance and weatheringqualities, along with good adhesion to ferrous and non-ferrousmetals without complex pretreatment or primers. This twocomponentcoating is typically sprayed on internal andexternal surfaces of HVAC-R heat exchangers and relatedequipment.

In 1964, Heresite was the first company to apply coatings to aluminum-finned, copper-tubed heat exchangers. The Heresite coating became then, and still remains a standard in the industrial coatings industry. We provide the highest quality protective coatings for air conditioning and refrigeration systems that operate in moderate to severely corrosive environments, including both coastal and/or industrial applications. Our phenolic epoxy has an advantage of dense cross linking and can therefore be applied as a very thin film maintaining stable heat transfer.

Product Details

• pH range (14 day liquid spot test) 2.4-12.6
• Temperature cycling (4 hours at -75 DegreeC; 4 hours at 190 DegreeC) 4B-5B adhesion after 5 cycles
• Dry heat resistance (4 hours at 200 DegreeC; 20 minutes at 232 DegreeC) 4B-5B adhesion after 5 cycles
• Microchannel Compatible
• Meets FDA 175.300 for indirect food contact
• Dielectric Strength [ISO 23762010(e)] 286 volts per mil of thickness.

P-403L high bake phenolic has been the industry standard for decades for the storage and transport of chemicals in rail cars and ISO/storage tanks. It is the optimum choice for your applications where pH< 9 is likely to be encountered. P-403L offers excellent resistance to solvents, acids and salts, including 70-98% sulfuric acid at temperatures up to 120 Degree F.

In 1964, Heresite was the first company to apply coatings to aluminum-finned, copper-tubed heat exchangers. The Heresite coating became then, and still remains a standard in the industrial coatings industry. We provide the highest quality protective coatings for air conditioning and refrigeration systems that operate in moderate to severely corrosive environments, including both coastal and/or industrial applications. A high performance polyurethane specially designed to provide superior performance in demanding environments. UC-5500 is formulated as a top coat for other Heresite Coatings. It exhibits outstanding UV resistance with excellent weathering qualities, along with good flexibility and good abrasion resistance. This two component coating is typically sprayed on the exterior surfaces of heat exchangers and related equipment, process equipment, transport vessels, tanks and structural steel.

We provide the highest quality protective coatings for air conditioning and refrigeration system that operate in moderate to severely corrosive environments, including both coastal and industrial applications. Heresite VR 514 is a thin film, air dry phenolic coating with excellent resistance to corrosive fume atmospheres and marine/salt air environments.