Engineering Services tenders − 721 govt. e −tenders

Repairing of both side tie rod, axle rod, and rear suspension bush hole and replacement of 12 nos. bush and removal of 20 nos. stud bolt of both rear tyre of ws 28-ii water sprinkler sl. no. 28054 of kdh project, nk area.

Empanelment of one or more experienced bidders for various services / jobs - expression of interest(eoi) for railtel corporation of india limited, sr-ernakulam (ers) territory

Annual operations and maintenance contract of sardar patel institute of public administration (spipa) campus - gandhinagar, for all civil, mechanical (hvac), electrical, extra low voltage (elv), multimedia (av), firefighting, landscape, site developments & related infrastructure works including mechanized cleaning, housekeeping works and facility management services including catering services. (2nd attempt)

Biennial rate contract brc for servicing and trouble shooting of electrical systems of eot cranes and hoists installed at pragati iii bawana 110039 : pps iii bawana limited ipgcl-ppcl||cs||cs-ii

Servicing of various pneumatic power cylinders during overhauling of unit-3, sgtpp. 742237 : sagardighi thermal power project. open tender the west bengal power development corporation ltd.||sagardighi thermal power project (sgtpp)

Operation and comprehensive annual maintenance contract for emf building installation trestles equipment used by group b at igi airport new delhi.

Instrumentation of 10 bridges, br. no. 1-af (span 1x15.85m) ddu-car, 611 rev. (span 6x18.29m) kvd-ktq, 676 dn/rev. (span 2x4x18.3m) dgo-dcx, br. no. 372 up (span 4x18.30m) gaya-ksta, 383 up (span 13x18.30 m) ksta-pry, 391 up (span 13x18.30m) pry-grru, 445 up (span 4x18.3m + 1x12.20m) rfj-jhn, 462 up (span 4x18.30m) jhn-pes, 493 up (span 3x18.30m) pes-aubr, 345 dn (span 18x30.50m + 1x9.15m) mpo-gaya, in g. c. section of ddu division under sse/br/ddu.

Catalyst replacement jobs in 103 r 01, 103-r-02 and 103-r-03 of cgot unit at haldia refinery 721606 : iocl haldia refinery limited indianoil||refineries||haldia refinery||contracts

Empanelment of contractors for various types of routine construction and maintenance works of civil, mechanical, electrical nature at retail outlets / depots / terminals / afs / rdi and rcds / lube plants / lpg plants/ office buildings / residential 781001 : engineering works under ioadso open tender indianoil||marketing||eastern region office||contract cell

Replacement of 20 nos flap shutters and 23 nos draw shutters including painting of total (30+30) 60 nos gates of 30 vent sluice at diamond harbour, p.s.- diamond harbour, block- diamond harbour-i, dist- 24 pgs(south)

Replacement of 10 nos damaged shutters and overhauling of hoisting gear box and allied works of 10 vent sluice at bantala, mouza - manpur, p.s- bidhannagar south, dist24pgs(north)

Work of annual rate contract for ash handling plant related operation and maintenance (mechanical, electrical, and instrumentation) work during online, routine, preventive, breakdown in 2x250 mw of sikka tps unit 3 and 4

Fab & repl of nb900 cog/mg pipings in cc

Supply of manufacture, supply and installation of cross beam girder (size of beam 11 meter long, crosssection 500 mm height & 180 mm width approx.) of 3ton eot crane along with suitable long transverse geared motors 2nos as per rwf drawing no. 703402210640. note: 1. only crane manufacturers or their authorized representatives with relevant expertise shall be eligible to participate in the tender. 2. the drawing attached is only for the general guidance. the supplier shall visit the rwf and take necessary data before commencing the work. 3. all raw materials necessary for the fabrication, including channels, plates, and structural steel, shall be supplied by the supplier. 4. the supplier shall also be responsible for the transportation of all components such as the fabricated cross beam, hoist, channels, plates, etc., to the rail wheel factory (rwf), including both to and fro movements, and shall bear all associated transportation charges. 5. thesupplier shall dismantling the existing electrical connections and the removal of the hoist assembly. proper support beams must be provided between the end carriages, and the cross beam (girder) must be carefullysupported before the removal of mounting bolts. the cross beam should then be lowered cautiously to prevent damage to surrounding equipment and shifted to the designated location. the temporary support beamfor the end carriages shall be removed thereafter. 6. the supplier shall remove the existing long travel gearbox along with its motor, and install a new gearbox and motor fitted with suitable gears and couplings. the hoist is to be reinstalled in its original position, and all electrical connections must be restored accordingly. once the mechanical and electrical installations are complete, the cross beam and associated structures shall be painted in yellow and black colors, adhering to standard safety norms for cranes. 7. rwf will provide to the supplier with air, electricity, water, and welding/oxy-cutting consumables free of cost. however, the supplier is required to supply all raw materials for fabrication and arrange all necessary tools, lifting tackles, and handling equipment for the execution of the work. the supplier is also obligated to provide appropriate personal protective equipment (ppe) such as helmets, gloves, safety harnesses, and other safety gear to all personnel working at the site. 8. after completion of all work, the supplier must conduct a load test of the crane and submit a valid load test certificate. throughout the execution, the supplier will be solely responsible for the safety of all workers engaged in the activity, and the entire work shall be carried out in compliance with applicable safety standards and rwf's guidelines. 9. the motor with gearbox for the lt movement shall have a minimum power of 1 hp, and its output speed shall be suitable to achieve an lt movement speed of at least 20 meters per minute. [ warranty period: 18 months after the date of delivery ] ]

Ee/o_m-iii/grww/e-t-14/25-26 700066 : grww,bibhangarh, kol-66 open tender kolkata municipal corporation||water supply

- repair and overhauling service - 4371 vibration analysisof main equipment onboard in lcu 52; vibrationanalysis of main equipment; no; buyer premises

Hiring of field instrumentation services at opal,

Oh bowl mill unit 3 231225 : anpara open tender up rajya vidyut utpadan nigam ltd||anpara thermal power project- uprvunl- sonebhadra

Machining rate contract

02 years arc of metalizing of de/nde motor bearing housing, trueness and dynamic balancing of rotor shaft under em-iph, em-oph, em-chp and em-ahp dept. 723146 : admin bldg. stps, purulia-723146 open tender the west bengal power development corporation ltd.||santaldih thermal power station (stps)