Online tenders on Metal & Steel Channel tenders − 288 eProcurement tenders

Supply of materials for welding work 400054 : ex eng tr office ws open tender municipal corporation of greater mumbai||solid waste management department||transport

- channel assembly 16-ee-106

Supply of set of channel assly for lhb ac 2-tier coaches, as per drawing: mp24chnllhb version 1, packing instruction: no special packing required. the protruding, threaded portion, gauges and loose items etc. if any are to be protected with suitable covering to prevent it from damage. however transit damage if any shall be at the cost of supplier., quality plan: 0 [ warranty period: 30 months after the date of delivery ] ]

Supply of channel assembly as per drawing: lw10151 alt.'a' [ warranty period: 30 months after the date of delivery ] ]

Supply of ms channel 100 x 50 mm x el 6.5 mtr. +0.100 -00 mtr. specn: is:2062, e250 gr.- bo/br[ warranty period: 30 months after the date of delivery ]

- , pvc channel , xlpe cable for working voltagesup to and including 1.1 kv as per is 7098 (part 1)

Supply of set of clamps angles, brackets, and channels including hardware as per cl-3 and as per relevant drawings indicated in cl.5.0 to specification no. icf/elec/132, cs 01 & 02, but without installation for under frame area of 3 phase ac emu, c trailer coach with bombardier electrics. [ warranty period: 30 months after the date of delivery] ]

Supply of (ms channel) hot rolled steel channel chg 40 to is : 3954 : 1991 (1st revision) and material to is: 2062 : 2011 (seventh revision), (amendment no.1 nov-2012) of grade designation e250 quality a, in length of 5 meter to 7 meter. [ warranty period: 30 months after the date of delivery ]

- map board channel 20 feet

Supply of manufacture, supply and installation of cross beam girder (size of beam 11 meter long, crosssection 500 mm height & 180 mm width approx.) of 3ton eot crane along with suitable long transverse geared motors 2nos as per rwf drawing no. 703402210640. note: 1. only crane manufacturers or their authorized representatives with relevant expertise shall be eligible to participate in the tender. 2. the drawing attached is only for the general guidance. the supplier shall visit the rwf and take necessary data before commencing the work. 3. all raw materials necessary for the fabrication, including channels, plates, and structural steel, shall be supplied by the supplier. 4. the supplier shall also be responsible for the transportation of all components such as the fabricated cross beam, hoist, channels, plates, etc., to the rail wheel factory (rwf), including both to and fro movements, and shall bear all associated transportation charges. 5. thesupplier shall dismantling the existing electrical connections and the removal of the hoist assembly. proper support beams must be provided between the end carriages, and the cross beam (girder) must be carefullysupported before the removal of mounting bolts. the cross beam should then be lowered cautiously to prevent damage to surrounding equipment and shifted to the designated location. the temporary support beamfor the end carriages shall be removed thereafter. 6. the supplier shall remove the existing long travel gearbox along with its motor, and install a new gearbox and motor fitted with suitable gears and couplings. the hoist is to be reinstalled in its original position, and all electrical connections must be restored accordingly. once the mechanical and electrical installations are complete, the cross beam and associated structures shall be painted in yellow and black colors, adhering to standard safety norms for cranes. 7. rwf will provide to the supplier with air, electricity, water, and welding/oxy-cutting consumables free of cost. however, the supplier is required to supply all raw materials for fabrication and arrange all necessary tools, lifting tackles, and handling equipment for the execution of the work. the supplier is also obligated to provide appropriate personal protective equipment (ppe) such as helmets, gloves, safety harnesses, and other safety gear to all personnel working at the site. 8. after completion of all work, the supplier must conduct a load test of the crane and submit a valid load test certificate. throughout the execution, the supplier will be solely responsible for the safety of all workers engaged in the activity, and the entire work shall be carried out in compliance with applicable safety standards and rwf's guidelines. 9. the motor with gearbox for the lt movement shall have a minimum power of 1 hp, and its output speed shall be suitable to achieve an lt movement speed of at least 20 meters per minute. [ warranty period: 18 months after the date of delivery ] ]

Supply of channel 200 x 75 mm x10m length. specn: material specification :steel, is: 808 / 89 section-4 & 2062/2011 gr.- e250, quality-a or latest. [ warranty period: 30 months after the date of delivery ] ]

Supply of channel fixing arrgt. (lh) & (rh) for doorway & gangway ceiling for lhb coaches., as per drawing: le44429 alt a (lh) & le44430 alt a (rh), packing instruction: items should be individually wrapped with corrugated paper and collectively packed in wooden box having sufficient strength, further tied with suitable nylon strips. a list should be pasted on each box showing purchase order no., pl no., description, drg / spec no, qty, firm name & address, date of dispatch etc. [ warranty period: 30 months after the date of delivery ] ]

- alluminium square channel with heavy mettle , esd pvceliminated sheet 5x3 , tool handing channel 2x5 , multiswitch and socket , mcb 32 amps , table lamp , ln keyscrews , base plate

Rate contract for supply of steel section (ms channel, ms angle, flat) for a period of one year 462023 : corporate office, mpmkvvcl nishtha parisar, bhopal open tender madhya pradesh madhya kshetra vidyut vitaran company limited||mpmkvvcl - procurement

Ex-godown. supply of spares of air compressors 244241 : hasanpur open tender the kisan sahkari chini mills ltd. gajraula-hasanpur

- hot rolled steel beam, column, channel and angle sections(v2) conforming to is 808

Providing of channel for fabrication work in r&r colony.

- hot rolled steel beam, column, channel and angle sections(v2) conforming to is 808

- stage assembly , 1000070529_ 3_ 16001053640_ testpoint mdlce69138840

Mint channel - top 6 amp , plug top 16 amp , cable tie 3 inch , cable tie 4inch , cable tie 6 inch , cable tie 12 inch , gatti wooden ,gatti pvc half inch , gatti pvc 3l4 inch , gatti pvc 1 inch ,gatti pvc 2 inch mint channel 4 feet, t channel 12 feet, pop screw 1 inch ,pop screw 2 inch , pop screw 3 inch , pop screw 1/2 inch,bed switch 6 amp one way, pvc flexible pipe 1/2 inch ,